Instructions for Replacing the Lamp Board

Instructions for Replacing the Lamp Board






    • Related Articles

    • RA-3320FG+ Lamp Replacement Procedure

      The attached PDF are the instructions for replacing the lamp in a RA-3320FG+ mercury analyzer
    • MA-3000 Main Board Replacement

      How to replace MA-3000 mainboard (1) Before replace it, need to write down some parameter (2) Open maintenance screen and click parameter (3) Enter 0219 as a password   (4) Open PRE TEMP and write each parameter down (red circle)   |   |   |   |   | ...
    • MA-3000 Lamp Replacement Procedure

      With the power off, open the optics cover, and remove the bracket that holds the lamp assembly to the chassis, and unplug the electrical connections from the board. Before going any further, note the orientation of the lamp. If needed, mark on the ...
    • MA-2000 LAMP REPLACEMENT and/or ADJUSTMENT

      This procedure will walk you through how to replace the lamp on the MA-2000.  It can also be used if the lamp needs to be adjusted for correct voltage readings. 1. Open the front of the system  2. Open the optics box  3. Remove the cell, tubing, etc. ...
    • RA-4300FG+ Mercury Lamp Replacement Instructions