RA-3320 Main board backup battery exchange

The attached PDF is the procedure to change the backup battery on the RA-3 Series instruments.

If the instrument is losing settings like the date and time, or language, or any other settings the battery on the main board may need to be replaced with this procedure.

• Related Articles

• MA-3000 Main Board Replacement

  How to replace MA-3000 mainboard (1) Before replace it, need to write down some parameter (2) Open maintenance screen and click parameter (3) Enter 0219 as a password   (4) Open PRE TEMP and write each parameter down (red circle)   |   |   |   |   | ...

• RA-5 User's Manual

  The attached PDF is the Model RA-5 User Operational and Maintenance instrument and software manual. The maintenance procedures for the RA-5 can be found in the manual.

• RA-3 Optic Adjustment

  This procedure should only be done at the direction of the AGS Technical Support Team, and after all other options have been exhausted. ​It is important that the Voltages are adjusted with a very clean cell and end cap glass pieces in place; ...

• RA-5 Update from Internal Tablet to External PC

  Easy Configuration - Estimated time of 20 minutes 1. Open the RA-5 2. Remove the tablet from the front panel 3. Remove the USB connection of the tablet from the left board 4. Remove one of the USB connections from the USB Conversion Port located on ...

• RA-4 Low Flow Error

  If you are getting a "Low Flow Error" on your RA-4300A system there are three main likely causes.  A leak, a restriction, or a problem with the air pump. It should be noted, if you have recently changed and parts, or have done any maintenance to any ...