Replacement of RA-7000A Air Pump

• Related Articles

• RA-3 Carrier Pump Test

  There are various reasons for a non-functioning air pump. 1. To verify if the pump functions       a. Open the maintenance screen on the RA-3       b. In an alternating pattern, press on the top left and top right corners of the touch screen, which ...

• RA-5 User's Manual

  The attached PDF is the Model RA-5 User Operational and Maintenance instrument and software manual. The maintenance procedures for the RA-5 can be found in the manual.

• RA-4 Low Flow Error

  If you are getting a "Low Flow Error" on your RA-4300A system there are three main likely causes.  A leak, a restriction, or a problem with the air pump. It should be noted, if you have recently changed and parts, or have done any maintenance to any ...

• RA-4500 Lamp Replacement

  It is important to note the positioning of the old lamp when removing, care should be taken to position the new lamp with the exact same positioning for best results. Remove the plate of the optical system box.  Then detach the connectors of the ...

• Replacing the Autosampler Arm Assembly - NIC RA-4 Series

  This operation should only be performed after consultation with AGS or NIC service personnel. 1)  With the RA-4 powered ON, click the top right icon in the software to move the arm to the down position. 2)  Power OFF the analyzer. 3)  Remove the ...