PE-1000 Lamp Replacement
The attached PDF may be used to replace, or exchange, the lamp in the PE-1000 instrument.
This procedure was taken directly from the manual. You can find the manual here.
Related Articles
RA-4500 Lamp Replacement
It is important to note the positioning of the old lamp when removing, care should be taken to position the new lamp with the exact same positioning for best results. Remove the plate of the optical system box. Then detach the connectors of the ...RA-4300A Lamp Replacement
It is important to note the positioning of the old lamp when removing, care should be taken to position the new lamp with the exact same positioning for best results. Remove the plate of the optical system box. Then detach the connectors of the ...MA-3000 Lamp Replacement Procedure
With the power off, open the optics cover, and remove the bracket that holds the lamp assembly to the chassis, and unplug the electrical connections from the board. Before going any further, note the orientation of the lamp. If needed, mark on the ...RA-3320FG+ Lamp Replacement Procedure
The attached PDF are the instructions for replacing the lamp in a RA-3320FG+ mercury analyzerMA-2000 LAMP REPLACEMENT and/or ADJUSTMENT
This procedure will walk you through how to replace the lamp on the MA-2000. It can also be used if the lamp needs to be adjusted for correct voltage readings. 1. Open the front of the system 2. Open the optics box 3. Remove the cell, tubing, etc. ...